Design007 Magazine

Design007-Apr2019

Issue link: http://iconnect007.uberflip.com/i/1101604

Contents of this Issue

Navigation

Page 23 of 85

24 DESIGN007 MAGAZINE I APRIL 2019 Feature by Denis Morin, Karel Tavernier, Jean-Pierre Charras, and Marius Matioc UCAMCO, KICAD AND PENTALOGIX Gerber is the world's favourite data exchange format for PCB image data: it's easy to use, crystal clear, and gives designers and engineers an unequivocal language with which to com- municate with each other. And this grand, old man of the PCB industry has remained at the forefront, powered by ongoing developments that add capability and functionality without ever compromising its characteristic simplicity and ease of use. It's the ideal solution for transferring drill data too, as can be seen from scanning the specification. And many in the PCB industry use it for just this, but the majority are still transferring their routing and drilling coordi- nates using NC formats. These were never de- signed for data transfer, and more often than not create confusion and waste time. Some argue that Gerber files, unlike NC files, can't be sent to a drilling machine. True enough, but PCB manufacturers never send their clients' incoming files to their machines anyway. In - stead, the data goes through the CAM process and is then altered and output as is appropriate to the manufacturer's specific production line. For CAD, the question should not be which for - mat is best for the machines, but rather which format is best for input into CAM. As we've said, this is undoubtedly Gerber. So, why are CAD developers and their us- ers still stuck on NC formats? It's most likely a question of inertia or tradition. Drill infor- mation has been transferred for decades using NC formats, principally Excellon, that are sim- ilar to the 1985 IPC-NC349 specification. Also, there's still a lot of legacy software out there, so NC files will likely be with us for a while. The Problem With Existing NC Specifications The problem is that so many NC files are of deplorable quality because the NC format was never designed as a data transfer format. It has always been a machine driver and contains all sorts of information that a drilling machine needs, but that is irrelevant and confusing for data exchange. For example, CAD software will typically ask users to specify whether routing should be achieved using nibbling or slot cre- ation and which drill feeds and speeds are to XNC Format: Gerber Takes Data Into the Future

Articles in this issue

Archives of this issue

view archives of Design007 Magazine - Design007-Apr2019