PCB007 Magazine

PCB007-Feb2022

Issue link: https://iconnect007.uberflip.com/i/1453746

Contents of this Issue

Navigation

Page 73 of 129

74 PCB007 MAGAZINE I FEBRUARY 2022 Feature Article by Happy Holden I-CONNECT007 For North America, there is a growing need for more ultra-high-density HDI capability. Some of the reasons for the slower adoption of SAP/HDI fabrication may rest with two obsta- cles: Subtractive processes have difficulty as they approach 50-micron traces and spaces (0.002"), and it is not clear what the total sys- tem acquisition costs will be for ultra-HDI. Introduction As PCB geometry begins to require 50-micron traces/spaces, subtractive pro- cesses start to have yield and imaging prob- lems. Semi-additive processes (SAP) are the chemical processes that are used for these applications. My column in the January issue of PCB007 Magazine outlines the various SAP processes used by our industry. e other fac- tor is the uncertainty in how much ultra-HDI is going to cost. is forms a real obstacle for implementation of SAP. One reason may be the absence of density metrics. Performance mea- sures are needed for the difficulty to assemble surface-mounted components with fine-pitch; the amount of density required on the printed circuit to mount all these fine-pitch devices in the area provided. In my opinion, the primary goal for PCB development process engineers is to imple- ment new customers' new products and/or new processes as part of expanding the busi- ness. As Figure 1 shows, implementing new technology is an "S-shaped curve." Lastly, it supports a strategic plan that the owners or the CEO have in terms of what is the long-term goal that you can constantly be working on. Risk reduction is one of those tasks. PCB Adoption of Innovations Risk Reduction Although the rewards for ultra-HDI or an SAP process are very concrete, the PCB designer may be more focused on the risks. In the development process, the risks to the customer need to be articulated and adequate solutions developed that allow the rewards (higher density) to tip the scales in favor of its adoption (Figure 2). is was true for me in popularizing HDI in the late 1980s. Hewlett-Packard had devel- oped laser drilling because of a need for low- inductance blind vias on its Finstrate COB in 1982. Publications about the technology in the HP Journal and at the IPC Technology Forum interested some OEMs like Siemens and IBM, but many OEMs had a "wait and see" atti- tude. It was not until HP proposed an alterna- tive design to a new device called the "cellular Figure 1: Adoption and innovation of new products and processes provides the opportunity for growth and rapid profit creation; PCBs contribute to this end. (Source: 24 Essential Skills for Engineers 1 )

Articles in this issue

Links on this page

Archives of this issue

view archives of PCB007 Magazine - PCB007-Feb2022