Issue link: https://iconnect007.uberflip.com/i/507417
54 The PCB Magazine • May 2015 I-Connect007 Technical Editor Pete Starkey caught up with Amphenol's Applications Engi- neer, Sean Keating, at IPC APEX EXPO in San Diego. Keating explains his company's commit- ment to proactive participation in the estab- lishment of standards, his personal experience working on standards committees, and his view on the importance of harmonised global stan- dards. Pete Starkey: It's nice to see you here at IPC APEX. I understand Amphenol is strongly interested in standards and that you are personally active on some committees. Start by telling us about that. Sean Keating: A m p h e n o l UK is very proactive in a number of the standards, in particular the certifi- cation standards. I have been working closely with IPC for about six or seven years now. My secondary reason for being here is that this is a fantastic forum for problem solv- ing. Any problems that have cropped up over the weeks or months prior to the show can of- ten be resolved using the immense technologi- cal think tank that's here on the show floor, in the meetings, or even in the bar! I'm on nine committees right now, from low pressure overmoulding to electronics in space, and I would say we're probably working 10+ hours a day. It's a busy week for a number of the standards; much of my focus is on the IPC/ WHMAA-620 cable and harness training com- mittee, which is meeting on Thursday to dis- cuss training. We are looking at having a more robust practical course that will be certifiable. This will mean that when you certify to that standard you have demonstrated the skills and proven ability to actually build a harness—not just inspect it. Perhaps, depending on how the committee decides, there will be different levels of harness ability or skill, but we will have to wait and see on that one! Starkey: IPC and IEC are really recognized as the world's standards authorities, but do you notice that some of the standards are originating from Asia and taking some prominence? Keating: Certainly not with anything we're doing in Europe, but I cannot answer for the whole group as we have facilities in more than 40 countries, worldwide. IPC, without doubt, has the lion's share of standards, which are im- posed on us by our major customers. As a design and manufacturing facility we get standards im- posed on us as well as what we pass onto our subcontractors. Virtually all of our major cus- tomers now have IPC standards of one type or another noted on their drawings. I've been with Amphenol for 26 years and for the last 10–12 years this has grown from occasionally seeing an IPC standard called out to the point now where nearly every single callout references an IPC standard. Starkey: Provided that there is some international cooperation and our colleagues in Asia are pre- pared to recognize Western standards and cooper- ate with them, there is worldwide harmony. Keating: Absolutely, and with Amphenol being a global company, we actually help train and facilitate at our India and China locations, so that within Amphenol worldwide, we're work- ing to the same standard. And that harmony is absolutely imperative. It also means that when we talk to them, when we look at them as low cost manufacturers, we can talk at exactly the same level and about the same things. So it re- ally has been helpful. Starkey: Sean, thanks very much for your time. Keating: Thank you, Pete. PCB Interested in participating in an interview for The PCB Magazine? Click here for more information! The Importance of Harmonized Standards that Benefit All intErViEw