PCB007 Magazine

PCB-Nov2015

Issue link: https://iconnect007.uberflip.com/i/597087

Contents of this Issue

Navigation

Page 35 of 87

36 The PCB Magazine • November 2015 Manufacturers of flexible circuits use several chemical processes for fabrication. These pro- cesses are generally located in a common area of the plant because of facility requirements and environmental considerations. These chemical operations are referred to as wet processes. Some of the specific processes that would be characterized as wet process in circuit fabrica- tion: • Develop-etch-strip: Photosensitive re- sist is developed so the unneeded resist is washed away, leaving a pattern of resist that defines the circuitry. The subsequent etching operation removes the base metal (normally copper) that has been exposed by the patterned resist. The last step is to remove (strip away) the resist that defined the circuitry. • Copper plating: This is typically an electro-chemical operation. Metal is elec- trodeposited onto the base metal surface thereby creating a thin, robust coating. Electroplating of copper is the most com- mon example and is used to create electri- cal connection between traces on the top and bottom of the insulating dielectric film. • Shadow plating: A laminate of met- al-dielectric-metal is initially drilled, punched, or laser ablated to form the vias. In order to initially create an elec- trical connection between the layers of metal, the dielectric must be coated with a conductive material. Shadow plating coats graphite inside a via and is a chemi- cal process commonly used by flexible circuit manufacturers. Each of these operations relies on chemical reactions, which may be supplemented with mechanical agitation, temperature and volt- age/current. In most cases the chemical make- up is the most critical element that affects the output. It is vital that critical process parameters are tightly controlled to assure desired results. The following are the basic outputs that are moni- tored and compared to a process or customer specification: • Trace width and spacing • Metal thickness • Via integrity • Metal composition Process control in a high product-mix wet process area presents a number of unique chal- by Dave Becker all Flex FlexIBle cIrcuItS llc all about flex Process Controls for Flexible Circuit Fabrication FeATure ColuMn Figure 1: Digital nomenclature printer.

Articles in this issue

Archives of this issue

view archives of PCB007 Magazine - PCB-Nov2015