The PCB Design Magazine

PCBD-May2016

Issue link: http://iconnect007.uberflip.com/i/679419

Contents of this Issue

Navigation

Page 24 of 73

Corporate Headquarters: Ontario, CA • ph: (909) 466-5635 • (800) 969-4842 Tech Center: Southington, CT • ph: (860) 793-4011 • (800) 243-3564 and Industry's Best Technical Team POWERED BY SCIENCE… www.uyemura.com … but our greatest strength is our technical team. UIC field and development specialists have an average of 26 years in the PCB industry, and a wealth of knowledge about how to make your shop succeed on all levels. Uyemura PCB finishes are best in class… Via Fill Coppers Including EVF-N, which simultaneously plates through-holes and blind vias (even those smaller than 150 μm), reducing process time by 50%. ENIG The industry standard for producing uniform mid-phos EN deposits with a thin topcoat of immersion gold, over copper. Solderable and aluminum wire bondable; no dummy plating. ENEPIG Only UIC has multiple options - alloyed and non-alloyed palladium baths - so you can choose for highest stability, greatest speed, substantially improved diffusion layer for optimized corrosion protection, widest processing window.

Articles in this issue

Links on this page

Archives of this issue

view archives of The PCB Design Magazine - PCBD-May2016