Issue link: https://iconnect007.uberflip.com/i/746712
70 The PCB Magazine • November 2016 Supplementing your production capabili- ties with flexible circuit laser processing can pay big dividends. It not only enables you to broaden the set of services you can offer your customers, but it also extends your reach into additional markets you might not otherwise be well-equipped to serve. Employing laser tech- nology is one of the best ways to stay current in PCB processing, since it enables you to process more accurate and smaller features than what is possible using mechanical processing. In a previous installment (part 3) of the "Stepping Up to Laser Processing for Flex" se- ries, we discussed the most critical issues related to ensuring that your factory is prepared for implementation of your new laser processing system. With your factory now prepared, let's review the issues associated with getting your new system installed and running properly, so that you can start processing your first runs. This time we'll focus on installation best prac- tices, system verification testing, training and the safe operation of your system. Getting it There As with any large piece of manufacturing equipment, just getting it onsite can be the first challenge. Your system supplier should be able to help coordinate transportation of the system to your facility. Working together with your supplier, your shipping/logistics partner and, if necessary, a local rigging company will ensure a smooth delivery and setup process. The International Commercial Terms (In- coterms) associated with your system purchase will outline the tasks, costs and risks associated with the system's shipment. It's a document that provides details regarding the location to which the system is being delivered and in - cludes the point at which final transportation and any associated insurance become your re- sponsibility. Due to liability concerns, you will typically need to take responsibility for movement of the system once it reaches your facility. Unless you can provide your own in-house rigging, it is a good practice to stage the equipment at your lo- by Mike Jennings and Patrick Riechel ESI Stepping Up to Laser Processing for Flex, Part 4: Installation, Training and Initial Operation FEATURE COLUMN: LASER POINTERS