IPC International Community magazine an association member publication
Issue link: https://iconnect007.uberflip.com/i/1547617
NOVEMBER 2026 I I-CONNECT007 MAGAZINE 19 adhesion strength, reduced surface roughness, and compatibility with low loss dielectric materials for high-frequency applications. The practical implication is that the copper– dielectric interface is becoming a critical design and process factor in advanced PCB, HDI, and package- substrate architectures. Surface treatment should therefore be evaluated not only as a safeguard for mechanical reliability, but also as a contributor to signal integrity, dimensional control, and stable long-term performance. Desmear and Metallization: Foundation for Reliability Since the original "through-hole" was developed, the electroless copper layer has created the basis on which subsequent processes are applied, mak- ing it critical to reliability, especially in new HDI and substrate-like architectures where vias are smaller and dielectric systems are more diverse (Figure 3). In advanced manufacturing, metallization is more than just "coverage." It must deliver consistent Cu-Cu-Cu interconnect and uniform initiation across mixed materials and glass types because defects here tend to be costly later on. Familiar performance themes emerge: • Throwing power and coverage in challenging features, including blind microvias • Compatibility with advanced dielectrics used in demanding applications • Deposition quality that supports new reliability testing standards For advanced substrate applications, new elec- troless copper developments are to provide blister- free deposition on smooth build-up dielectrics and high throwing power into small, high aspect ratio blind microvias. Figure 3: Advanced HDI PCB production involves multiple interconnected steps, from surface preparation and lamination through drilling, desmear, metallization, plating, and final surface finishing. N ext- g e n e ra t i o n P C B M a n u fa ct u r i n g

