IPC International Community magazine an association member publication
Issue link: https://iconnect007.uberflip.com/i/1547617
114 I-CONNECT007 MAGAZINE I NOVEMBER 2026 contributed guidance during the SEMI standards development activity. Some are primarily concerned with the handling and processing of these thin glass panels, but experienced fabricators of silicon mate- rials have these procedures in place. The propri- etary formulations of glass from these suppliers, known as "gorilla glass," are very tough, delivered in sheets at thicknesses ranging from 100 µm to 400 µm (0.0394" to 0.1575"). Multilayer Polymer-Glass-based Interposer Fabrication Process and Concerns The multilayer polymer glass interposer fabrication process includes various critical stages: • Material selection: The process uses specific polymer glass materials with desirable optical and mechanical properties. • Layering technique: Multiple layers are deposited to create the interposer structure, allowing for complex integration of components. • Patterning methods: Techniques such as photolithography are employed to define the optical and electrical pathways within the interposer. • Via creation: High-quality through- and blind vias are fabricated, with diameters as small as 20 µm. Historical note: In six decades, the electronics industry moved from the basic integration of common working elements (digital logic gates, amplifiers, oscillators, timers, and counters), indi- vidually packaged for PCB interconnect, to a mono- lithic configuration that combines all the functional elements into a single silicon-based system-level product. The first commercial microprocessor was introduced by Intel Corporation in 1971. In part 2, I will focus on polymer-glass interposer design strategy on multilayer copper/polymer mate- rial variations, fabrication process, and current design guidelines for interconnect routing. I-CONNECT007 Vern Solberg is an indepen- dent technical consultant, specializing in SMT and mi- croelectronics design and manufacturing technology. He is the author of several books, including Design Guidelines for Surface Mount and Microelectronic Technology. To read past columns, click here. Figure 2: Chiplet configured panel-level, system package units. D ES I G N E R 'S N OT E B O O K

