IPC International Community magazine an association member publication
Issue link: https://iconnect007.uberflip.com/i/1547617
NOVEMBER 2026 I I-CONNECT007 MAGAZINE 21 interconnect structures. For PCB manufacturers, the influence of advanced packaging is more apparent here, as requirements once primarily associated with package substrates are increasingly relevant to high- end PCB and substrate-like PCB production. This shift is reinforced by the convergence of process expectations in advanced substrates, substrate-like PCBs, and advanced packaging. Wet processes must now meet tighter requirements for deposit uniformity, impurity control, surface morphology, and interface consistency (Figure 4). This explains why advanced chemistry and surface finishing have become more important in the manufacturing of next-generation electronics. Wet-process performance is being judged by inter- face readiness, which is the ability to provide the necessary cleanliness, roughness profile, metal- lurgical stability, and compatibility for the next process step. In many cases, the decisive factor is not the bulk deposit itself but rather the control and reproducibility of the top surface region. Future developments toward lower-roughness interfaces and ultra-thin copper will further increase the importance of this requirement. At the same time, wet processing must be consid- ered part of the entire manufacturing process. Its effectiveness hinges on close collaboration with laser drilling, desmear, activation, surface condi- tioning, and in-line process control. One of the clearest technology trends is the shift toward inte- grated process chains involving lasers, chemicals, and wet process equipment because interconnect capability is increasingly determined by how well these elements are matched in production rather than by the nominal performance of a single step in isolation. As interconnect architectures become more demanding, process capability is defined by the coordinated optimization of chemistry, equip- ment, and control strategy. "One of the most important shifts we are seeing across the electronics industry is that performance can no longer be viewed as the result of a single breakthrough technology," Henry says. "Whether the application is AI infrastructure, high-performance computing, advanced packaging, or next-generation PCBs, success increasingly depends on how well N ext- g e n e ra t i o n P C B M a n u fa ct u r i n g Figure 4: AI processors and high-bandwidth memory illustrate the growing interconnect complexity driving tighter requirements for copper deposition, surface preparation, and process consistency in advanced packaging.

