IPC International Community magazine an association member publication
Issue link: https://iconnect007.uberflip.com/i/1547617
54 I-CONNECT007 MAGAZINE I NOVEMBER 2026 electroless copper deposition followed by elec- troplating to form a plated-over-filled-via (POFV) structure. This approach not only provides complete elec- trical isolation but also enables routing directly over the filled vias, maximizing routing density on the outer layers. The through-hole any-layer interconnection process offers an alternative approach to several challenges in PCB manufacturing. By creating electrically inde- pendent connections within a single plated through- hole, the method provides greater flexibility in inter- layer routing while reducing the need for multiple lamination, drilling, and plating cycles. Its applications in thick-copper structures, high density BGA fan-out, and outer-layer partitioning demonstrate how a common manufacturing process can address different design requirements. However, manufacturing efficiency and routing flexibility are only part of the equation. The reliability of these structures is equally important, particu- larly for applications involving thermal stress, high current, and demanding operating conditions. Part 2 examines the results of reliability testing, com- pares the proposed method with conventional build- up technology, and considers the challenges and op- portunities associated with broader industry adoption. Figure 9: Outer-layer partition using POFV technology. Figure 8: Outer-layer partition by solder mask filling. Technical Paper, Part 1

