I-Connect007 Magazine

I007-Nov2026

IPC International Community magazine an association member publication

Issue link: https://iconnect007.uberflip.com/i/1547617

Contents of this Issue

Navigation

Page 63 of 129

64 I-CONNECT007 MAGAZINE I NOVEMBER 2026 performance than SAC 305. These findings support evaluating Pb-free alternatives on their demon- strated performance rather than dismissing them based on longstanding assumptions. Design for Environment (DFE) Reliability, however, is only part of the decision. In partnership with the EPA and electronics industry participants, the University of Tennessee's Center for Clean Products conducted a life-cycle assess- ment (LCA) of tin-lead and lead-free solders used in electronics. 2 The project evaluated tin-lead solder alongside three lead-free alternatives: • 99.3% tin and 0.7% copper • 95.5% tin, 4.0% silver, and 0.5% copper • 92.3% tin, 3.4% silver, 1.0% copper, and 3.3% bismuth The study gave solder manufacturers, users, and suppliers a basis for incorporating environmental considerations into material selection. Rather than examining only one manufacturing step, an LCA considers potential impacts across a product's life- cycle. For this project, those stages included: 1. Raw material extraction or acquisition and material processing 2. Solder manufacture 3. Solder application 4. End-of-life disposition This broader perspective helps manufacturers evaluate solders that meet application require- ments while potentially reducing impacts on public health and the environment. The assessment also identified areas for further research and provided information relevant to electronics purchasing and end-of-life management. The important lesson is to evaluate the full lifecycle, rather than assume that a material substitution improves every envi- ronmental outcome. Making Modern Electronics Possible and Sustainable Manufacturers have a responsibility to protect the resources that make their businesses, and modern life, possible. In PCB fabrication, that means paying close attention to water use, wastewater treatment, hazardous chemicals, and potential toxic emissions. Some essential manufacturing materials present health and environmental risks. We must under- stand those risks, control them effectively, and pur- sue opportunities to reduce them without compro- mising quality or performance. Sustainability goes beyond regulatory compli- ance. It requires us to examine processes, question established practices, and evaluate alternatives using sound data. Even incremental reductions in resource consumption and waste can contribute to meaningful progress. The goal is not to abandon the materials and processes that make modern elec- tronics possible. It is to use them more responsibly and keep improving how we do it. I-CONNECT007 References 1. Collapse: How Complex Societies Choose to Fail or Survive, by Jared Diamond, Penguin, 2005. 2. "Solders in Electronics: A Life-Cycle Assessment," by Jack R. Geibig and Maria Leet Socolof, U.S. EPA. Resources • "What is Sustainability? Definition, Three Pillars and Career Paths," by Matthew Mason, Feb. 7, 2026. • Design for Experiment, ScienceDirect. Michael Carano brings over 40 years of electronics industry ex- perience with special expertise in manufacturing, performance chemicals, metals, semiconduc- tors, medical devices, and ad- vanced packaging. To read past columns, click here. T RO U B L E I N YO U R TA N K

Articles in this issue

Links on this page

view archives of I-Connect007 Magazine - I007-Nov2026