I-Connect007 Magazine

I007-Nov2026

IPC International Community magazine an association member publication

Issue link: https://iconnect007.uberflip.com/i/1547617

Contents of this Issue

Navigation

Page 71 of 129

72 I-CONNECT007 MAGAZINE I NOVEMBER 2026 requirements, testing, and other details that are often buried in meetings and email threads. A repeat- able design and review process helps teams build power supplies that are more predictable, reliable, and production-ready. In this article, I'll share the checklist I use for power supply design reviews and explain how it can help both new and experienced engineers avoid common pitfalls and create designs that are ready for the real world. The Problem With the Typical Power Supply Design Review Most engineering workflows don't enforce enough requirements for a working power supply the first go-round. This experience exposed me to just how incomplete the power electronics design engineer- ing process is. Every hardware test and regulatory requirement exposed what we hadn't considered or had skipped over in the earlier part of the process. So, whether we addressed the problems sooner or later, they were always addressed. We just needed to decide how much more time and money we wanted to spend finding something out that could have been prevented in the first place. I figured, "The reference design was done by engineers and works for them, so it'll work for me." This experience is common enough because not everything that's published is correct for my problem or application. Top Five Oversights on Most Power Supply Designs Power supply designs can fail in the field due to a few overlooked details. For each oversight listed below, we'll cover: • Why it's missed in a normal power supply design review • What happens when you overlook it • What the checklist tells you to do so you avoid those problems altogether Let's start with the oversights that cause the most problems, as foundational problems wreak the most havoc. Then we'll look at how to prevent them. Problem 1: Return Path Discontinuity Why it's missing in review: Engineers tend to check return paths simply by visual inspection, if even re- viewed at all. Unless the return path is embedded in your constraints, it is likely to get overlooked or have gaps. What happens when you overlook it: Return path discontinuities allow EM waves and fields to leak. The leakage of fields causes EMI noise issues for other devices, fails emissions testing, generates unwanted noise, and more. Even misoperation of components depends on their sensitivity level to said noise. How to avoid this problem: Create an unbroken return plane that connects to ground. Especially put that return plane underneath the hot loops. The hot Figure 1: Higher frequency return path (illustrated) current avoiding voids on a flyback converter PCB designed in Allegro X PCB layout. What Standard Power Supply Design Reviews Miss

Articles in this issue

view archives of I-Connect007 Magazine - I007-Nov2026