SMT007 Magazine


Issue link:

Contents of this Issue


Page 69 of 74

70 SMT Magazine • June 2015 aCross the Board In-CIRCuIT PIn TeSTInG: continues figure 3: combinations of force and pin shape used in clamshell test device. figure 4: Three common pin shapes. Figure 5: A value-in-use model, based on the first-pass yield of paste A versus paste S. Simple modeling was confirmed that the savings in first-pass yield was $128 for every kilogram of paste used.

Articles in this issue

Archives of this issue

view archives of SMT007 Magazine - SMT-June2015