Design007 Magazine

Design007-Oct2018

Issue link: http://iconnect007.uberflip.com/i/1040234

Contents of this Issue

Navigation

Page 78 of 89

OCTOBER 2018 I DESIGN007 MAGAZINE 79 5 PCB West 2018 Draws a Crowd of Designers and Technologists E The I-Connect007 team attended UP Media Group's PCB West 2018 Conference and Exhi- bition in September. I have been attending this event for many years, and every year the show is better than the year before. This year was no exception. 6 Transitioning from FR-4 to High-Frequency Materials, Revisited E The bottom line is that FR-4 materials have been around a long time, and they work well within the range they are formulated to work. The same can be said for high- frequency circuit materials, which are also thought of as low-loss mate- rials. However, there is a definite gray area that can muddy the waters when a designer is weighing a possible decision to switch from FR-4 to low-loss materials. 7 Samtec Releases Over 100,000 New Models on SnapEDA E With this new collabora- tion, designers can now easily discover, down- load, and design with over 100,000 ready-to-use Samtec connector mod- els, helping accelerate the design process. The new models include USB, card edge, board-to-board, headers, and RF coaxial connectors. 8 Version 2.8 of Ucamco's Free Reference Gerber Viewer Now Available E "For version 2.8 of the Reference Gerber Viewer our focus was ease of use and especially ease of learning. Plenty of users of the viewer need it only from time to time, and for them it is of paramount importance that it is very intui- tive," said Peter Vermeulen, lead developer of the Reference Gerber Viewer. 9 Zuken to Hold Fall Webinar Series E Zuken's Fall Webi- nar Series will run from September 2018 through March 2019. The company will be covering a wide range of topics from Silicon Expert to E3.series MCAD co-design. J Mentor Xpedition and PADS Professional Win ISO 26262 Functional Safety Compliance E Mentor's Xpedition and PADS Professional printed circuit board design (PCB) design flows, including the Valor NPI and HyperLynx family of products, have each achieved ISO 26262 functional safety compliance. PCBDesign007.com for the latest circuit design news and information—anywhere, anytime.

Articles in this issue

Links on this page

Archives of this issue

view archives of Design007 Magazine - Design007-Oct2018