Issue link: https://iconnect007.uberflip.com/i/1391285
108 DESIGN007 MAGAZINE I JULY 2021 Career Opportunities Maintenance Technician Inspects work-related conditions to determine compliance with prescribed operating and safety standards. Oper- ates power-driven machinery and uses equipment and tools commonly used to maintain facilities and equipment. Replace filters, belts, and additional parts for repairs and preventive maintenance. Moves objects weighing up to 150 lbs. using a hand truck or pulley. Cleans work area and equipment. Works with clean- ing fluids, agents, chemicals, and paints using protective gear. Works at elevations greater than ten feet, climbing ladders, while repairing or maintaining building structures and equipment. Assists skilled maintenance technicians/workers in more complex tasks and possible after-hours emergency repairs. Must meet schedul- ing and attendance requirements. ____________________________________________________ Plating Operator Plating operator for printed circuit boards. No experience necessary, will train. Must be able to work with chemi- cals, lift up to 50 pounds, and have good math skills. Minimum high school/GED or equivalent. All shifts (1st, 2nd, 3rd), 8 hours per day minimum, Monday thru Fri- day. Saturday and Sunday work is com- mon allowing for steady overtime pay. Water Treatment Operator Responsible for operating waste treat- ment plant, our operation that converts wastewater in drains and sewers into a form that's metal free to release into the environment. Control equipment and monitor pro- cesses that remove metals from waste- water. Run tests to make sure that the processes are working correctly. Keep records of water quality and pH. Oper- ate and maintain the pumps and motors that move water and wastewater through filtration systems. Read meters and gauges to make sure plant equip- ment is working properly. Take samples and run tests to determine the quality of the water being produced. Adjust the amount of chemicals being added to the water and keep records that document compliance. ____________________________________________________ Drilling Operator Drilling operator for printed circuit boards. Minimum 2 years of experience. Minimum high school/GED or equivalent. All Shifts (1st, 2nd, 3rd), 8 hours per day minimum, Monday thru Friday. Saturday and Sunday work is common allowing for overtime pay.