IPC International Community magazine an association member publication
Issue link: https://iconnect007.uberflip.com/i/1547617
26 I-CONNECT007 MAGAZINE I NOVEMBER 2026 Quick-turn facilities will generally build exactly the part you have designed. I have had many instances where customers said they built a round of proto- types with a quick-turn shop, and the parts were not working as they had planned. Ultimately, they did not save themselves any time, and it was no fault of the quick-turn house, which built exactly what it was provided with. Here is an outline of the basic design steps that can help you avoid getting painted into that prover- bial corner. Define the Physical Shape of the Circuit Start with a 3D model that defines the areas that need to be connected. If this is not an option, you can have a 3D-printed sample of your enclosure cre- ated. From there, you can try hand-cutting paper or Mylar to arrive at the desired outline of your circuit. This will be a great starting point. In some cases, paper dolls actually work better (I'm old-school). Determine what termination options you plan to utilize. Factors to consider will be ease of instal- lation, how rugged the connection will be (shock and vibration requirements), whether the option supports any current-carrying needs, and avail- ability and cost. As for choices, anything that can be used in a rigid PCB can generally be incorporated into a flex design. This may include: • Through-hole connectors • SMT connectors • ZIF connectors • Crimp contacts • Solder pads • Wires • Anisotropic adhesive that makes contact to pads on the flex Determine your component needs and create a bill of materials. This will be required to determine whether you need a flex circuit (maybe with stiff- eners) or a rigid-flex design. A rule of thumb: If you need surface mount compo- nents on the top and bottom surfaces in the same region, you likely will need a rigid-flex design. This will also be required to achieve pad layouts and keep-out areas on the external layer(s) that need to be void of traces. Using the 3D CAD model, or your mockup, define the areas where bends need to occur. Keep in mind whether this is a static (bend-to-install) or a dynamic flexing application. This will be needed as you start to think about material selections, as well as where to place any required components. Using your 3D model and all this additional infor- mation, flatten the circuit and create a paper doll to evaluate the fit within your device. If needed or desired, work with your supplier to get a circuit mock-up created using similar polyimide and copper thicknesses. Without the traces being etched and possibly plated, this will not be an exact representa- tion but is a great starting point. Create Your Schematic This will be required for step 3. Depending on where nets need to terminate, you may need crossovers (vias) and the need for additional layers of circuitry. Determine the Layers How many layers will you need to achieve the desired number of traces, given the remaining available space (including terminations, vias, and components)? Start with a very producible design; target 100-micron traces and spaces as a good starting point. These can be reduced, but it will come at a cost. Yields will be lower, and the smaller your features are, the more you may reduce your supply base. Not all suppliers can or will etch features below 75 microns. Figure 1: 3D printed model with a "paper doll" mockup to check fit. FLEX007 | F L E X C O N N ECT I O N S

