I-Connect007 Magazine

I007-Nov2026

IPC International Community magazine an association member publication

Issue link: https://iconnect007.uberflip.com/i/1547617

Contents of this Issue

Navigation

Page 90 of 129

NOVEMBER 2026 I I-CONNECT007 MAGAZINE 91 From Trusted Alternatives to Available Products Qualified flexibility gives purchasing more room to act because the technical work and approval deci- sions have been made in advance. It can reduce the delay between identifying a supply problem and implementing an acceptable response. It can- not guarantee that capacity or material will always be available. The value lies in being prepared. We know our options, understand their limits, and have the evidence to support their use. There is also an earlier opportunity to improve those options. Design decisions determine whether the product can make practical use of the materials and factories we have qualified. That is the subject of my next article: Design for Availability. Qualified flexibility establishes which alternatives we can trust. Design for availability helps ensure our designs can use them. When the supplier calls to say the speci- fied laminate is unavailable, are we ready to offer an informed answer? I-CONNECT007 References 1. "Lead Free Assembly: A Practical Tool for Laminate Materials Selection," by Erik J. Bergum and David Humby, Isola, 2005. 2. "Digging Deeper into Dielectric Constant for PCB Materials," Rogers Corporation, 2020. 3. "Material & Process Influences on Conductive Anodic Filamentation (CAF)," Isola. 4. "IPC Validation Services—Qualified Products List (QPL), IPC-4101," IPC, accessed Oct. 9, 2026. 5. "Validation Services—Frequently Asked Questions," Global Electronics Association. 6. "Test Report (Self-Tested Data): Arlon Product 33N, IPC- 4101/40," Arlon, Feb. 17, 2023. 7. "Technical Capability," NCAB Group. 8. "Design for Availability: Building PCB Supply Chain Resilience Through Smarter Design," by Jan Pedersen, NCAB Norway, Sept. 10, 2026. 9. "PSR-4000 BW01DI Technical Data Sheet," Taiyo America, revised Sept. 22, 2017. Jan Pedersen is an independent PCB technology and circularity consultant, and industry writer. Qualified Flexibility From Substrate to System: Why Integration Is the Real RF Breakthrough In my last column, I described the ceramic substrate itself, and why material choice matters so deeply in RF, microwave, and millimeter-wave applications. Dielectric constant, loss tangent, thermal conductivity, stability across tempera- ture, and frequency are the physical rules that govern whether a signal arrives intact or collaps- es into noise. But focusing only on the substrate is a bit like judging a city solely by its geology. Bedrock matters, of course. Without it, nothing stands. But it's how a city emerges from the bedrock: roads connect, utilities are routed, neighborhoods interact, and systems layer on top of one another. BY C H A N D R A G U PTA , R E M T EC RF performance works the same way. Once a ceramic substrate is chosen, the real story is in how that material evolves into a package, and how packages evolve into modules. It's where integration becomes the defining vari- able and where many RF designs either succeed quietly or fail expensively. The Substrate Is the Beginning, Not the Solution A ceramic substrate on its own is inert. It doesn't amplify signals, filter noise, or dissipate heat... BELOW THE SURFACE Continue reading this column here.

Articles in this issue

Links on this page

view archives of I-Connect007 Magazine - I007-Nov2026