Issue link: https://iconnect007.uberflip.com/i/455818
80 SMT Magazine • February 2015 Although tin whiskers are very small crys- talline fibers, typically 1–3 μ in diameter and 100 μ or less in length, they have reportedly caused multiple NASA satellites to become in- operable [1] , automotive accelerator pedals to be- come unusable [2] and a nuclear reactor to mal- function [3] . Despite the catastrophic potential of these failures, the risk to high-reliability tele- com and infrastructure, automotive, medical and aerospace applications can be minimized by specifying material sets that are less likely to produce tin whiskers. As many circuit designs in these end-use markets finally convert to lead-free technology, the choice of lead-free solder alloy, component IO finish, PCB surface finish and the use of a ro- bust conformal coating process have each been shown to greatly reduce the probability of tin whisker growth. Although no accelerated tin whisker growth test is widely known, creating a high stress tin plating (brass substrate and fine grain bright tin plating) has been used to pur- posely create tin whiskers [4] . There is evidence that alloying small amounts of metals with tin can reduce/elimi- nate whisker growth. As little as 3% Pb (still 30x the RoHS allowed limit) has shown to mitigate tin whisker growth [5] . This means that SAC alloys, with silver and copper alloyed into the tin, are less prone to whisker growth than 100% tin alloys, especially after the stress reliev- ing process of solderpaste reflow. However, a team of scientists from Beijing University were able to create whiskers by adding a stress induc- ing dose of 1% Cesium/Erbium/Yttrium alloy [6] . However, I do not see a future for this alloy in high-volume manufacturing. Component leads are commonly plated with pure tin. Bright tin, with fine grain struc- ture (0.5–0.8 μ grains) is known to be a com- mon source of tin whiskers. Lead frames plated with bright tin, then formed into shapes are even more likely to produce whiskers due to the increased stress on the plating. Matte tin plat- ing chemistry, with lower stress, larger grain structures (1–5 μ grains) are commonly used to by Mitch Holtzer alpHa aCrOSS THe bOard Minimizing the risk of Tin Whisker Formation in Lead-Free assemblies Feature Column