I-Connect007 Magazine

I007-Nov2026

IPC International Community magazine an association member publication

Issue link: https://iconnect007.uberflip.com/i/1547617

Contents of this Issue

Navigation

Page 88 of 129

NOVEMBER 2026 I I-CONNECT007 MAGAZINE 89 granting the QPL listing. This is why it is useful to distinguish who tests from who qualifies. A QPL entry provides valuable evidence about the material and the requirements covered by the qualification. But we still need to establish how that material will perform in the proposed PCB construc- tion and fabrication process. It is important to note that a material that is absent from the QPL may still be suitable. It may have been tested and qualified through another route. Combining Material and PCB Factory Qualification For me, the most complete practical basis for quali- fied flexibility is to qualify the material together with the PCB production facility and the processes that will use it. This brings the evidence closer to the product we are actually buying. I did much of this qualification work during my time with NCAB, covering a broad range of lami- nates and solder masks, conducted alongside PCB factory qualification. Its public capability informa- tion describes a documented material qualification procedure and additional material approval and qualification by its Preferred Supplier List factories. 7,8 The connection matters. We need confidence in the material's properties and in the factory's ability to process it consistently under the approved conditions. Other PCB suppliers, manufacturers and customer qualification programs can establish this same connection, using internal expertise, external labo- ratories, or a combination. The principle can be applied wherever the necessary evidence, respon- sibilities and production controls are in place. For laminate, you want to know whether the supporting evidence covers the proposed cores and prepregs, as well as the construction and processing conditions. What has the factory already manufac- tured with this material? Which reliability require- ments has the testing shown it can meet? Are there conditions or limitations attached to the approval? The answers determine whether a material is a usable alternative for this board. A familiar trade name, a matching slash sheet, or successful use elsewhere can help the evaluation, but we still need to check suit- ability at the factory that will produce the board. The same applies to solder mask. The exact product must be considered alongside its applica- tion, imaging, development, and curing conditions, where applicable. Compatibility with the surface finish and assembly process also matters. Taiyo's PSR-4000 BW01DI technical data sheet illustrates the evidence available from a material supplier: processing guidance and reported adhe- sion, chemical resistance, insulation and thermal testing against IPC-SM-840E requirements. 9 Factory qualification checks whether the factory's process can consistently achieve the required solder mask performance on the board. This combination is what's most valuable: an identified material, a capable production facility, a controlled process, and evidence supporting their use together. An Approval Has Boundaries and Needs an Owner A factory's approval should identify the technolo- gies and manufacturing limits it can support. A ma- terial's approval should establish where and under which conditions it may be used. Both approvals " Before approving the alternative for production, we need to check that the combined qualification evidence covers the requirements of the board we need to manufacture." Qualified Flexibility

Articles in this issue

view archives of I-Connect007 Magazine - I007-Nov2026