Design007 Magazine

PCBD-Oct2015

Issue link: https://iconnect007.uberflip.com/i/586473

Contents of this Issue

Navigation

Page 43 of 71

44 The PCB Design Magazine • October 2015 layers pre-defined to get you started. Figure 3(c), is similar to Lee Ritchey's favorite stackup. This has all the good attributes that I have described, throughout this series, although 18 layers may- be overkill in some cases. But this basic configu- ration could be cut-down to 14 or 10 layers by removing groups of dual stripline layers. Be creative. You can use more layers for planes, single or dual stripline routing layers but keep them symmetrical and most importantly, watch the return paths. The layer count always increments by even numbers. So, follow the ba- sic rules I have set out in this stackup planning series and you cannot go wrong. Remember that beyond design STACKuP PLANNING, PART 4 Figure 3: image illustrating the signal/plane configuration for 12–18 layers.

Articles in this issue

Archives of this issue

view archives of Design007 Magazine - PCBD-Oct2015